From 5 to 200 mesh Titanium Grade 5 wire cloth 3.7165 mesh R56400 Filter Filtration
Properties of material 3.7165: high strength; good toughness; good hot formability and weldability; very good corrosion resistance;
Main areas of application for material 3.7165: plant and mechanical engineering; aerospace; ptrasound technology; chemical industry;
Length tolerance +/-3mm
- Production time - 5-7 weeks.
- Shipping preparation - 2-3 working days.
- Delivery time - depending on the parcel service. Look at the faq please.
Titanium Grade 5 is a titanium alloy for primary forming of forgings. 3.7165 is the EN designation for this material. Ti-6Al-4V is the common commercial designation. The ASTM designation is Titanium Grade 5.
Among forged titanium, it has a relatively low density. It also has a moderately high heat capacity and a relatively high melting temperature.
Titanium sheet 3.7165 is used in particular for the manufacture of structural and engine parts, but also for fastening elements in aviation. Titanium Grade 5 mesh is highly corrosion resistant and is therefore suitable for use in maritime environments, in the surface treatment industry and in the deck equipment industry. The material is mainly available in the annealed condition, but can also be treated up to a temperature of almost 350 °C.
Titanium Grade 5 is very resistant to general corrosion and pitting. Chlorinated solvents should be avoided. Titanium is also susceptible to hydrogen embrittlement, so it is important to limit the oxygen supply during heat treatment or chemical pickling.
Properties of the material 3.7165:
- high strength
- good toughness
- good hot formability and weldability
- very good corrosion resistance
Main areas of application for the material 3.7165:
- Plant and mechanical engineering
- Ultrasonic technology
- Chemical industry
Online Shop Auremo is committed to providing you with high quality titanium products. All metals are subjected to quality control at various stages of production. You can always buy titanium and other metals at a good price.
|Country and region of manufacture:||Germany|
|Manufacturer number:||Not applicable|
|Type:||Mesh, stainless steel mesh|
Chemical composition (%):
Mechanical properties (room temperature):
|Hardness HB 30||0.2% Yield strength Rp - N/mm2||Tensile strength Rm||Elongation A5 %||Modulus of elasticity kN/mm2|
Physical properties (room temperature):
|Density g/cm3||Specific heat J/kg K||Thermal conductivity W/(mK)||Electr. resistance Ω-mm2/m|