Stainless steel sheet 0.3-20mm 1.4571 V4A VA 316Ti plates Strips cut to size selectable 100-1000mm
€7.63
VAT included
- 1.4404;Aisi 316Ti; X2CrNiMo17-12-2;
- density 8.0g/cm³;
- Available cut or made to measure.
The tolerance for the width and length of a sheet metal blank is +/-2mm
The tolerance for the width and length of a sheet metal blank is +/-3mm.
Attention: sharp edges! Sheets are cut to size on impact shears and edges are not deburred. Scratches on the surface cannot be excluded. Item photos are theoretical, delivered blanks may differ.
Description:
Stainless steel is an alloy metal with high corrosion resistance. Corrosion resistance in atmospheric and corrosive environments and at different temperatures is provided by the alloying elements that make up this metal.
AISI 316Ti contains a small amount of titanium. The proportion is about 0.5%. The main advantage of this grade over the other two grades is its higher resistance to high temperatures.
AISI 316Ti has good oxidation resistance in environments with an intermittent temperature of 870 °C and a constant temperature of 925 °C. However, corrosion resistance decreases when the environment is aqueous and the temperature is between 425 and 860 °C.
Stainless steel is widely used in all areas of human life, from mechanical engineering to the manufacture of household appliances and electronics. Stainless steel is now almost irreplaceable in the manufacture of containers for the storage and transport of food.
Stainless steel 1.4571 offers the following advantages:
- Durability
- good weldability
- long service life
- economy
- good appearance
Stainless steel 1.4571 is used in the following areas:
- Chemical industry, petroleum industry
- Construction industry
- Vehicle construction
- Electrical industry
- Food industry
- Household appliances
Our online shop Auremo has a very large selection of different types of steel and you can always choose something without any problems.
Technical data:
| Brand: | Auremo |
| Country and region of manufacture: | Germany |
| Manufacturer number: | Not applicable |
| Type: | Sheet metal |
| Standard Classifications: | |
| Material number: | 1.4571 |
| EN: | X6CrNiMoTi17-12-2 |
| AISI/SAE: | 316 Ti |
| UNS: | S31635 |
Chemical composition (in %):
| C | Si | Mn | S | Cr | Mo | Ni | Ti |
| max. 0.08% | 1.0% | 2.0% | 0.015% | 16.5-18.5% | 2.0-2.5% | 10.5-13.5% | 5 x C |
Mechanical properties (guide values at 20°C):
| Hardness HB 30 | 0.2% Yield strength Rp - N/mm2 | Tensile strength Rm | Elongation A5 % | Modulus of elasticity kN/mm2 |
| 215 | 200 | 500-700 | 40/30 | 200 |
Physical properties (guide values at 20°C):
| Density g/cm3 | Specific heat J/kg K | Thermal conductivity W/(mK) | Electr. resistance Ω-mm2/m |
| 8 | 500 | 15 | 0.75 |
You might also like
Reviews
By
tobiafleische3
T.
on
05 Jan 2022
(Stainless steel sheet 0.3-20mm 1.4571 V4A VA 316Ti plates Strips cut to size selectable 100-1000mm) :
(5/5)
Top, zeer goede service en sup...
Top, zeer goede service en supersnelle levering! Elk moment!
Report abuse
By
emilio-peterson
E.
on
27 Oct 2021
(Stainless steel sheet 0.3-20mm 1.4571 V4A VA 316Ti plates Strips cut to size selectable 100-1000mm) :
(5/5)
By
richirich1975
R.
on
16 Aug 2021
(Stainless steel sheet 0.3-20mm 1.4571 V4A VA 316Ti plates Strips cut to size selectable 100-1000mm) :
(5/5)
- 1.4404;Aisi 316Ti; X2CrNiMo17-12-2;
- density 8.0g/cm³;
- Available cut or made to measure.
The tolerance for the width and length of a sheet metal blank is +/-2mm
Stainless steel sheet 0.3-20mm 1.4571 V4A VA 316Ti plates Strips cut to size selectable 100-1000mm
€7.63
VAT included