Stainless steel mesh 300-400Mesh Wire mesh 1.4404 V4A 316 L X2CrNiMo17-12-2

€9.20

VAT included

width :

length :

Mesh :

Quantity :

Customer ratings and reviews

Nobody has posted a review yet

in this language

Rate it

Description
Product Details

The tolerance for the width and length of a sheet metal blank is +/-2mm

Important: Sheet metal cuts are not suitable for decorative or visible areas. Cutting is done with guillotine shears. Edges sharp! Not all sheets in protective film. Surface pure industrial quality - scratches not excluded! Please enquire separately in advance - we will try to find a solution for you.

Description:

Production time - none. Already in stock.
Shipping preparation - 2-3 working days.
Delivery time - depending on the parcel service. Please look at the faq.

Please note: Cutting with guillotine shears. Cutting tolerance +/- 2mm.

Stainless steel with the material number 1.4404 is a widely used chromium-nickel steel with added molybdenum and the alloy designation X2CrNiMo17-12-2.

One of the main advantages of AISI 316L stainless steel is its increased corrosion resistance in corrosive environments. The heat resistance can reach almost 600°C while maintaining high formability.

Comparing two similar stainless steel grades, AISI 304 and AISI 316L, it is easy to favour the second. AISI 316L has the best creep strength at high temperatures and mechanical properties that are an order of magnitude better at sub-zero temperatures. The difference between these two stainless steels is therefore obvious.

In cases where there is a risk of corrosion in welded constructions, a low-carbon grade AISI 316L should be used. Despite its great advantages, the price of AISI 316L is an order of magnitude higher than that of AISI 304, so careful consideration should be given to whether a stainless steel with molybdenum is required or whether it can be replaced by a food grade AISI 304.

Properties of the material 1.4404:

Very high corrosion resistance
excellent heat resistance
good creep resistance
good forgeability
very good weldability
polishable

Main areas of application for the material 1.4404:

Automotive industry
construction industry
Mechanical engineering
Electronic devices
Food industry
Medical industry

If you have any questions about a product or your order, please contact our customer service.

Chemical composition (in %):

C	Si	Mn	S	Cr	Mo	Ni	N
max. 0.03%	1.00%	2.00%	0.015%	16.5-18.5%	2.0-2.5%	10-13%	0.11%

Mechanical properties (room temperature):

Hardness HB 30	0.2% Yield strength Rp - N/mm2	Tensile strength Rm	Elongation A5	Modulus of elasticity kN/mm2
215	200	500-700	40/30%	200

Physical properties (room temperature):

Density g/cm3	Solidification range ° C	Electrical conductivity MS/m	Thermal conductivity W/(mK)	Electrical resistance Ω-mm2/m
8	500	15	121	0.75