Alloy K-500 Bar Monel® From 5 To 100mm Round Bar 2.4375 UNS N05500
Properties of the material 2.4375: excellent corrosion resistance in the field of marine engineering and chemistry; high resistance to chloride-induced stress corrosion cracking; good tensile strength in the temperature range up to 650 °C;
Main application of the material 2.4375: oil and gas production; Chemical industry; marine engineering;
Length tolerance +/-3mm
- Production time - 5-7 weeks.
- Preparation for shipment - 2-3 working days.
- Delivery time - depending on the parcel service. Look at the FAQ please.
If you need bars made of the material 2.4375, buy them at the online shop Auremo at reasonable prices.
Material 2.4375 is a nickel-copper alloy that combines the excellent corrosion resistance of 2.4360 with higher strength and hardness benefits. Enhanced properties are achieved by adding aluminum and titanium to the nickel-copper base and heating under controlled conditions to precipitate the sub-microscopic Ni3 (Ti,Al) particles throughout the matrix. Thermal treatment for precipitation in W.Nr. 2.4375 material is often referred to as wet hardening or aging.
Typical applications for 2.4375 material include chains and cables, marine fasteners and springs, pump and valve components for chemical processing, doctor blades and scrapers for pulp processing in papermaking, oil well accessories and tools, pump shafts and impellers, non-magnetic housings , safety elevators and valves for oil and gas exploration and sensors and other electronic components.
Properties of the material 2.4375:
- excellent corrosion resistance in marine and chemical fields
- high resistance to chloride-induced stress corrosion cracking
- good tensile strength in the temperature range up to 650 °C
Main application of the material 2.4375:
- oil and gas production
- chemical industry
- marine engineering
In our online shop Auremo you will find various sizes of nickel rods, we also have a large selection of other rods at reasonable prices. If you have any questions, contact us.
|Manufacturing Country And Region:||Germany|
|Manufacturer number:||Not applicable|
Chemical composition (in %):
Mechanical properties (reference values at 20°C):
|0.2% yield strength Rp - N/mm2||Tensile strength MPa||Elongation at break A5 %||Modulus of elasticity kN / mm²|
Physical properties (approximate values at 20°C):
|Density g/cm3||Specific heat J/kg K||Thermal conductivity W/(mK)||Electrical resistance Ω mm2/m|