- New
Haynes 25 Alloy Sheet from 0.1 to 38.1mm L605(HS 25) Plate 2.4964 R30605 Custom Cut 100-1000mm
€1,878.40
VAT included
Properties of the material 2.4964: good strength; good oxidation resistance; high corrosion resistance; good weldability;
Main application of the material 2.4964: aerospace industry; commercial gas turbine engines; combustion chambers and afterburner systems; high-temperature ball bearings and bearing rings;
Length Tolerance +/-2mm
Description:
- Production time - >Production time - 6-7 weeks.
- Shipping preparation - 2-3 working days.
- Delivery time - depending on the parcel service. Please check the FAQs.
If you need material 2.4964, buy it in the Auremo online shop at favorable prices.
HAYNES 25 (L605) is a non-magnetic cobalt-based superalloy. Alloy L-605 has good strength up to 2150°F. HAYNES 25 (L605) has good oxidation resistance up to 1900°F. HAYNES 25 (L605) has unique corrosion resistance in very challenging environments. It is highly resistant to hydrochloric acid, nitric acid, and moist chlorine (caution is advised at certain concentrations and temperatures).
The hardness of Alloy L-605 is typically 250 BHN and never exceeds 275 BHN according to specification. Not significantly hardenable. Does not respond to conventional aging treatments, but strain aging at relatively low temperatures (700-1100°F) can improve creep and rupture strength when the alloy is used at temperatures below 1300°F. HAYNES 25 (L605) is an austenitic alloy.
The alloy L605 is the strongest of the formable cobalt alloys and is suitable for continuous use up to 1800°F. Due to its long and widespread use, this alloy has been the subject of numerous investigations to determine its properties under a variety of conditions, making it an exceptionally well-characterized material.
Material 2.4964 is well resistant to high-temperature oxidation and carburization. Although the alloy is not primarily intended for use in aqueous corrosion, it is also resistant to corrosion by acids such as hydrochloric and nitric acid as well as by moist chlorine solutions.
Properties of material 2.4964:
- good strength
- good oxidation resistance
- high corrosion resistance
- good weldability
Main application of material 2.4964:
- aerospace industry
- commercial gas turbine engines
- combustion chambers and afterburners
- high-temperature ball bearings and bearing rings
In our Auremo online shop, you will find Alloy L-605, and we also have a wide selection of other materials at a favorable price. If you have questions, contact us.
Technical Data:
| Brand: | Auremo |
| Country and region of manufacture: | Germany |
| Manufacturer number: | Not applicable |
| Type: | Rod, Round bar |
| Material: | HAYNES 25 (L605) |
Technical Data:
Chemical composition (in %):
| Ni | Cr | Co | Fe | W | Mn |
| 9.0-11.0% | 19.0-21.0% | Rest | 3.0% | 14.0-16.0% | 2.0% |
Mechanical properties (room temperature):
| 0.2% Yield strength Rp - N/mm2 | Tensile strength MPa | Elongation A5% | Elastic Modulus kN/mm2 |
| 345 | 830-1130 | 25 | 225 |
Physical properties (room temperature):
| Density in g/cm3 | Specific Heat J/kg K | Thermal Conductivity W/(mK) | Electrical Resistance Ω·mm2/m |
| 9.1 | 420 | 16 | 0.88 |
You might also like
Properties of the material 2.4964: good strength; good oxidation resistance; high corrosion resistance; good weldability;
Main application of the material 2.4964: aerospace industry; commercial gas turbine engines; combustion chambers and afterburner systems; high-temperature ball bearings and bearing rings;
Haynes 25 Alloy Sheet from 0.1 to 38.1mm L605(HS 25) Plate 2.4964 R30605 Custom Cut 100-1000mm
€1,878.40
VAT included