• New

    Stainless steel sheet 0.5-3mm 1.4841 plates 314 strips cut to order

    VAT included

    Stainless steel sheet 0.5-3mm 1.4841 plates 314 strips cut to order

    Thickness / Strength :
    width :
    length :
    Quantity :
     Customer ratings and reviews
    Nobody has posted a review yet
    in this language


    The material 1.4841 is an austenitic steel. Stainless steel sheet 1.4841 is chemically resistant up to approx. 1100 °C.. This steel is more heat resistant and very good weldable without preheating. It shows good mechanical properties and very good scale resistance in dry air.

    Due to its high nickel content, it is already austenitic at room temperature and therefore does not acquire hardness. It is also a non-magnetising steel.

    AISI 314 belongs to the class of austenitic stainless steels due to its high nickel content. It is described as a material with high temperature resistance because the phase structure does not change at high operating temperatures and room temperature and is suitable for such applications. A high nickel and chromium content also ensures high corrosion resistance.

    Especially in high temperature applications, annealing and heat treatment furnaces, crucibles, heat exchangers, steam boilers, high temperature moulds, glass manufacture, porcelain burners, nozzles, glass furnaces, rings, grids, thermocouple protection tubes, pipes and cylindrical parts of the petrochemical industry, furnace covers, recuperators, fans, pipe clamps, in short almost all areas with high temperature and corrosion wear.

    Properties of the material 1.4841:

    • good heat resistance
    • good forgeability
    • good weldability
    • Corrosion resistance

    Use of stainless steel sheet 1.4841:

    • Furnace construction, apparatus engineering and mechanical engineering
    • petroleum industry, chemical industry, petrochemical industry
    • Waste incineration plants
    • Cement chain industry

    Chemical composition (in %)

    C Si Mn S Cr Ni N
    max. 0.02% 1.5-2.5% 2.00% 0.015% 24-26% 19-22% 0.11 %

    Technical data:

    Brand: Auremo
    Manufacturer number: Not applicable
    Type: Sheet, Plate
    Material: Stainless steel
    Standard classifications:
    Material number: 1.4841
    AISI: 314
    EN: X15CrNiSi25-21
    UNS: S31400
    Further information:
    Density: 7.9 g/cm³
    Thermal conductivity: 15 W/(m-K)
    Electr. resistance: 0.9 Ω mm²/m.
    Tensile strength: 550 - 750 MPa
    Edelstahl, Blech

    Specific References


    Be the first to write your review !

    Stainless steel sheet 0.5-3mm 1.4841 plates 314 strips cut to order
    VAT included