Alloy 75 Bar Nimonic® From 4 To 101.6mm Round Bar 2.4951 UNS N06075
Properties of the material 2.4951: excellent resistance in oxidizing environments up to 1000 °C; good mechanical properties at high temperatures;
Main application of the material 2.4951: steam and gas turbines; nuclear engineering; furnace construction; heat treatment plants; Environmental engineering;
Length tolerance +/-3mm
- Production time - 5-7 weeks.
- Preparation for shipment - 2-3 working days.
- Delivery time - depending on the parcel service. Look at the FAQ please.
If you need rods made of material 2.4951, you can buy them from the Auremo online shop at reasonable prices.
Material 2.4951 is an 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. First introduced in the 1940's for turbine blades in the Whittle jet engine prototype, this product is primarily used for sheet metal applications requiring medium strength for oxidation and scale resistance at high operating temperatures. W.Nr. 2.4951 are currently used in gas turbine technology as well as for industrial heat treatment, furnace components and heat treatment plants. It is easy to fabricate and weld.
The material 2.4951 should be annealed before welding, but a small amount of cold deformation is tolerable. The allowable amount of cold working varies by component design, but simple bending and rolling does not necessarily involve pre-annealing prior to welding. The heat affected zone created by 2.4951 material does not cause weld pitting and post-weld heat treatment is not normally required. If the equipment is required to operate in contact with caustic soda, fluorosilicates or some mercury salts, stress relieving treatment may be desirable.
Properties of the material 2.4951:
- excellent resistance in oxidizing environments up to 1000 °C
- good mechanical properties at high temperatures
- good corrosion resistance
Main application of the material 2.4951:
- steam and gas turbines
- nuclear engineering
- furnace construction
- heat treatment plants
- environmental engineering
In our online shop Auremo you will find various sizes of nickel rods, we also have a large selection of other rods at reasonable prices. If you have any questions, contact us.
|Manufacturing Country And Region:||Germany|
|Manufacturer number:||Not applicable|
Chemical composition (in %):
Mechanical properties (reference values at 20°C):
|0.2% yield strength Rp - N/mm2||Tensile strength MPa||Elongation at break A5 %||Modulus of elasticity kN / mm²|
Physical properties (approximate values at 20°C):
|Density g/cm3||Specific heat J/kg K||Thermal conductivity W/(mK)||Electrical resistance Ω mm2/m|