- New
Sheet steel 1.2-3mm S235 / 1.0038 iron plates sheet cutting selectable to measure 100-1000mm
€0.92
VAT included
- Wnr. S235 / 1.0038;
- density 7.85 g/cm³; thermal conductivity 54 W/mK; electrical resistance 0.15 Ω mm²/m; melting point 1420-1460 °C;
- Available cut or made to measure.
The tolerance for the width and length of a sheet metal blank is +/-3mm.
Attention: sharp edges! Sheets are cut to size on impact shears and edges are not deburred. Scratches on the surface cannot be excluded. Item photos are theoretical, delivered blanks may differ.
Description:
In the Auremo Online Shop you can always order sheets made of the material 1.0038.
The good wear resistance of these steels is achieved by quenching and tempering. The high hardness (300-500 HB) considerably extends the service life of abrasively stressed constructions.
These steels are suitable for versatile use in steel and metal construction, in apparatus engineering, in the pipe industry, in tank construction and can be welded well using all common methods. These structural steels can be used wherever a minimum yield strength is prescribed and static requirements have to be met.
Welding of S235 does not require any special conditions and is permissible in all respects, both in industrial plants and on outdoor construction sites. By electric welding, contact welding, automatic arc welding or manual arc welding, simple and complex metal constructions can be produced without preheating or heat treatment. The welding of Art. C235 does not cause cracks or hairiness near the weld. Forging S235 is no different. The metal is heated to a specific temperature and adjusted to the parameters and dimensions required for casting and yielding.
Properties of the material 1.0038:
- high strength
- good strength and toughness
- excellent hardness
- good weldability and forgeability
- good corrosion resistance
- cost-effective
Main areas of application for the material 1.0038:
- Metal, structural, civil engineering and bridge construction
- Civil engineering
- Vehicle construction
- Hydraulic engineering
- Mechanical engineering
- Decorative purposes
- Electronic devices
Do you need someone to realise your idea with this material? Contact us and our customer service will help you.
Technical data:
| Brand: | Auremo |
| Country and region of manufacture: | Germany |
| Manufacturer number: | Not applicable |
| Type: | Sheet metal |
| Material: | Steel |
| Standard classifications: | |
| Material number: | 1.0038 |
| Short name | S235JR |
Chemical composition (in %):
| C | Mn | P | S | Cu | N |
| max. 0.17% | 1.4% | 0.035% | 0.035% | 0.55% | 0.012% |
Mechanical properties (guide values at 20°C):
| Hardness HB 30 | 0.2% Yield strength Rp - N/mm2 | Tensile strength Rm | Elongation A5 % |
| 300-500 | 215-235 | 360-510 | 20 |
Physical properties (guide values at 20°C):
| Density g/cm3 | Specific heat J/kg K | Thermal conductivity W/(mK) | Electr. resistance Ω-mm2/m |
| 7.85 | 461 | 54 | 0.15 |
Reviews
By
bigbuddy2008
B.
on
01 Dec 2021
(Sheet steel 1.2-3mm S235 / 1.0038 iron plates sheet cutting selectable to measure 100-1000mm) :
(5/5)
By
poller45
P.
on
11 Oct 2021
(Sheet steel 1.2-3mm S235 / 1.0038 iron plates sheet cutting selectable to measure 100-1000mm) :
(4/5)
By
www_marinefliegergeschwader-2_de
W.
on
03 Jul 2021
(Sheet steel 1.2-3mm S235 / 1.0038 iron plates sheet cutting selectable to measure 100-1000mm) :
(5/5)
- Wnr. S235 / 1.0038;
- density 7.85 g/cm³; thermal conductivity 54 W/mK; electrical resistance 0.15 Ω mm²/m; melting point 1420-1460 °C;
- Available cut or made to measure.
Sheet steel 1.2-3mm S235 / 1.0038 iron plates sheet cutting selectable to measure 100-1000mm
€0.92
VAT included