Stainless steel sheet 1.2-3mm 1.4571 V2A VA 316Ti plates strips cut selectable 100-1000mm
- 1.4571;Aisi 316Ti; X2CrNiMo17-12-2;
- density 8.0g/cm³;
- Available cut or made to measure.
The tolerance for the width and length of a sheet metal blank is +/-2mm
The tolerance for the width and length of a sheet metal blank is +/-3mm.
Attention: sharp edges! Sheets are cut to size on impact shears and edges are not deburred. Scratches on the surface cannot be excluded. Item photos are theoretical, delivered blanks may differ.
Stainless steel is an alloy metal with high corrosion resistance. Corrosion resistance in atmospheric and corrosive environments and at different temperatures is provided by the alloying elements that make up this metal.
AISI 316Ti contains a small amount of titanium. The proportion is about 0.5%. The main advantage of this grade over the other two grades is its higher resistance to high temperatures.
AISI 316Ti has good oxidation resistance in environments with an intermittent temperature of 870 °C and a constant temperature of 925 °C. However, corrosion resistance decreases when the environment is aqueous and the temperature is between 425 and 860 °C.
Stainless steel is widely used in all areas of human life, from mechanical engineering to the manufacture of household appliances and electronics. Stainless steel is now almost irreplaceable in the manufacture of containers for the storage and transport of food.
Stainless steel 1.4571 offers the following advantages:
- good weldability
- long service life
- good appearance
Stainless steel 1.4571 is used in the following areas:
- Chemical industry, petroleum industry
- Construction industry
- Vehicle construction
- Electrical industry
- Food industry
- Household appliances
Our online shop Auremo has a very large selection of different types of steel and you can always choose something without any problems.
|Country and region of manufacture:||Germany|
|Manufacturer number:||Not applicable|
Chemical composition (in %):
|max. 0.08%||1.0%||2.0%||0.015%||16.5-18.5%||2.0-2.5%||10.5-13.5%||5 x C|
Mechanical properties (guide values at 20°C):
|Hardness HB 30||0.2% Yield strength Rp - N/mm2||Tensile strength Rm||Elongation A5 %||Modulus of elasticity kN/mm2|
Physical properties (guide values at 20°C):
|Density g/cm3||Specific heat J/kg K||Thermal conductivity W/(mK)||Electr. resistance Ω-mm2/m|
Geweldig, graag weer....
Geweldig, graag weer.Report abuse
Alles is in orde...... graag w...
Alles is in orde...... graag weer!Report abuse
Zeer snelle levering. Goederen...
Zeer snelle levering. Goederen ok, bedanktReport abuse