Checker plate 8/9.5mm steel checker plate cover 100mm to 2000mm cut
Checker plate 8/9.5mm steel checker plate cover 100mm to 2000mm cut.
The tolerance for the width and length of a sheet metal blank is +/-2mm
- TOP quality at fair prices
- High-quality products made to measure and cut to size
- Competent advice & service
- Fast delivery worldwide
|Manufacturer number:||Not applicable|
|Operation area:||as a support for access ramps; work platforms; stair treads and landings; platforms, ramps and walkways; as a manhole cover (revision or cable manhole)|
|melting point:||1420 - 1450ºC|
|Tensile strenght:||360 - 510MPa|
|Modulus of elasticity:||212kN/mm²|
|thermal conductivity:||54 W/(m K)|
|Electrical resistance:||0.15 Ω mm²/m|
Checker plate steel is a plate with a ribbed structure made of S235JR non-alloy steel. The material has a material number 1.0038. This steel is one of the hot-rolled structural steels and is one of the most commonly used materials in construction. The quality is easy to weld and form and impresses with its very good strength. Checker plate steel is very resilient and abrasion-resistant, but has no passive layer and is therefore not corrosion-resistant. To protect it from corrosion, another surface coating is required.
Due to its properties, steel checker plate can be used in many ways. Since it can be driven on without any problems, steel checker plate is often used as a support for drive-on ramps. Other uses of checker plate steel are as follows:
- work platforms;
- stair treads and landings;
- platforms, ramps and walkways;
- as a manhole cover (revision or cable manhole).
Checker plate steel is characterized by the following features:
- good weldability and formability;
- very good strength;
- very resilient and abrasion-resistant;
- not corrosion resistant (requires an additional surface coating).
documentationData sheet (German)
b - width
I - length